Thank you for purchasing the G0704 Belt Drive prints from Hossmachine.


You can download the file here. http://www.g0704.com/G0704beltdrives.zip


Formats are in AutoCAD .dxf, .stl, .pdf and windows .jpg

Included are the following for building ether the timing pulley or V-belt versions.

3D Prints
CNC Timing Pulley Version
CNC V-Belt Version
Quill Drive Version (both timing and V-belt)
Premade Single Pulley Beltdrive
Tach Pickup Mount
MAD Drawbar
Drawbar Wrench
Spindle Spanner Wrench
Prints for using the Stock 600 Watt Spindle Motor, PM25MV Spindle Motor,
1100 Watt BF30 Spindle Motor and Nordic Track Treadmill Motor


For the Stock 600 Watt motor, The timing pulley version uses a 75 tooth 3/8 inch wide XL timing belt. The v-belt version uses a 3L150 fractional HP belt. ( Note: a 2L150 could be used also)
read the "Read Me" text in the folders for more belt info.
belleville washers for the MAD -  MSC #: 87779880 from www1.mscdirect.com
The M20x1.0 nut for the top of the spindle. http://us.misumi-ec.com  search for FUNT20

The password for the .zip file is  x57mnB9x



Upgrade of the spindle bearings prior to use is highly recommended, we bear no responsibility
for any damage that may be caused to the stock bearings or other mill components
due to the large increase in RPM output.

Hossmachine and any other intermediate parties are in no way responsible for any damage or injury, direct or consequential, relating to the use or construction of any of the projects or information outlined here.
The information contained here is for general guidance on matters of interest only.

All copyrightable text and graphics, the selection, arrangement, and presentation of all materials (including information in the public domain), and the overall design of the prints are ©2007 Daniel E. Kemp. All rights reserved. Permission is granted to download and print materials for the purpose of viewing, reading, and retaining for reference. Any other copying, distribution, retransmission,  or modification of information or materials, whether in electronic or hard copy form, or construction of parts or kits based on these designs for resale without the express prior written permission of Daniel E. Kemp and Hossmachine, is strictly prohibited.